VAG KKL for 409.1 OBD2 USB Diagnostic Cable Scanner Interface for VW,for Audi,for Seat,for Skoda

Operating System:Windows 7 32bits/Windows 10 64bits/Windows 11 64bits
Primary Function:  VAG KKL USB Tnterface Cable

OBDII Plug: J1962 16-Pin Male (to Car)

Operating Software Compatibility: Windows 98SE / ME / 2000 / NT and XP.

Supports terminal (K) bus communication.

Terminal (L) ignition for waking up car computing system (ECU) engine control unit.

Has 3 different protocols with same OBD2 connector including ISO/KWP, VPW, PMW.

Work with most for Volkswagen and for Audi models sold worldwide from 1994 to current year.

Also supports ISO9141 protocol.

The VAG cable can not work if your car uses a protocol bus system like VPW, PWM or CAN -bus.

The K Diagnostic interface cables works on ISO/KWP (Key Word Protocol) that were launched after 1996.

Compatible Vehicles: For Volkswagen, For Audi, For skoda, seat:

For Audi Models:

- Compatible: A2 / A3 / A4 Cabriolet / A6 / A8 / S2 / S3 / TT

- Not Compatible: 80 / 100 / 200 / A3(8P) / A4(B7) / A6(C6/4F) / A8 / A8L(D3/4E) / Q7

For SEAT Models:

- Compatible: for Alhambra / for Altea / for Arosa / for Cordoba / for Ibiza / for Inca / for Leon MK 1 / for Leon MK 2 / for Toledo

- Not Compatible: for Altea (5P) / for Leon (1P) / for Toledo (5P)

For Skoda:

- Compatible: for Fabia / for Felicia / for Octavia MK 1 / for Octavia MK 2 / for Superb=

- Not Compatible: for Octavia (1Z)

For VW:

- Compatible: for Beetle / for Bora / for Caddy / for Corrado / for Golf MK2 / for Golf MK3 / for Golf MK4 / for Jetta MK3 / for Jetta MK4/ for Lupo / for Passat MK3 / for Passat MK4 / for Polo MK3 / for Polo MK4 / for Touran / for Touareg / for Transporter T3 / for Transporter T4 / for Transporter T5.

- Not Compatible: for Caddy (2K) / for Golf MK5 (1K) / for Golf Plus / for Jetta MK5 (1K) / for Passat MK5 (B6) / for Passat MK6 (B6) / for Phaeton /for Touran (1T)

 Package Including:

-1PCS x VAG KKL Cable

-1PCS x CD Drive

Description:  FIDI FT232RL

Revised adaptation screen to support the much longer long adaptations now appearing in some control modules

Much improved documentation (label files) for many older cars

Read and clear manufacturer diagnostic trouble codes

Existed 3 different protocols with same OBD2 connector includs ISO / KWP, VPW, PMW

View and change control module default settings

Avaliable Color : Blue

Save on expensive garage fees by diagnosing your car's faults

Don't fork out for the expensive VAG-1551 or VAG-1552 scan tools - purchase this cable for a fraction of the cost and download the VAG software instead

Characteristic:

Chip: FIDI FT232RL

USB interface cable

OBDII Plug: J1962 16-Pin Male (to Car)

Operating Software Compatibility: Windows XP.

Supports terminal (K) bus communication

Terminal (L) ignition for waking up car computing system (ECU) engine control unit

3 different protocols with same OBD2 connector including ISO/KWP, VPW, PMW.

Supports ISO9141 protocol

No DC or alternate power supply needed, just connect to your car and computer

Work with most for Volkswagen and for Audi models sold worldwide from 1994 to current year

The CVFG-A11 cable can not work if your car uses a protocol bus system like VPW, PWM or CAN-bus

Compatible Vehicles: For V-W, For Audi, For skoda, For seat

1.For Audi Models:

-Compatible: A2/A3/A4 Cabriolet/A6/A8/S2/S3/TT

-Not Compatible: 80/100/200/A3(8P)/A4(B7)/A6(C6/4F)/A8/A8L(D3/4E)/Q7

2. For SEAT Models:

-Compatible: Alhambra / Altea / Arosa / Cordoba / Ibiza / Inca / Leon MK 1 / Leon MK 2 / Toledo

-Not Compatible: Altea (5P) / Leon (1P) / Toledo (5P)

3. For Skoda Models:

-Compatible: Fabia/Felicia/Octavia MK 1/Octavia MK 2/Superb

-Not Compatible: Octavia (1Z)

4.For V-W Models:

-Compatible: Beetle/Bora/Caddy/Corrado/Golf MK2/Golf MK3/Golf MK4/Jetta MK3/Jetta MK4/Lupo/Passat MK3/Passat MK4/Polo MK3/Polo MK4/Touran/Touareg/Transporter T3/Transporter T4/Transporter T5.

-Not Compatible: Caddy (2K) / Golf MK5 (1K) / Golf Plus / Jetta MK5 (1K) / Passat MK5 (B6) / Passat MK6 (B6) / Phaeton/Touran (1T)